rig-16

Rig # 16 Inventory
12,000 feet Rig

Drawworks:
2009 Service King SK-775 Six Axle Carrier, Single Drum powered by 2 each Detroit Diesel 475 HP Series 60 Engines, 950 Total HP, two Avtec Allison transmission, Lebus drum grooved for 1 1/8” line, Hydraulic makeup & breakout catheads, air driller’s controls.

Brake:
42” x 12” brake bands with drum water circulating brakes and dual 48” x 10 DISC Assist brakes.

Derrick:
Service King 112’ x 350,000 lb hydraulically raised and scoped derrick, Serial Number DK-403, API 4F-4G, S & K crown block with safety platform and climbing ladder. Crown operates on eight lines, 1 1/8” grooved with four each 30 inch sheaves and one 36” sheave. Crown-o-matic. The Stand pipe is 4 inch 5000 psi rated. The racking board holds 12,000 feet of 4 ½” drill pipe. It is equipped with a fall restraint device for use while climbing.

Substructure 15 feet:
15’ height x 10’ 2” wide substructure with 350,000 lb stand back capacity, 16 feet KB. (Annular & RAM BOP mounted inside)

Powered Pumps:
#1 Gardner Denver PZ-9 Triplex, 1000 HP, forged steel fluid end w/ quick-change caps, relief valve, pressure gauge, cooling pump, 5 x 6 charge pump, master skid, powered by 800 HP Detroit Diesel 12V12000 with air clutch. Normally stocked with 6 ½” & 7” liners.

#2 Gardner Denver MPZ-9 Triplex, 1000 HP, forged steel fluid end w/ quick-change caps, relief valve, pressure gauge, cooling pump, 5 x 6 charge pump, master skid, powered by 1100 HP Caterpillar Diesel 3508 with air clutch. Normally stocked with 5” & 7” liners.

Mud Pit System:
Shaker Tank 12’ 2” width x 6 ’ height x 42’ length 440 bbl, 2 each 5 x 6 centrifugal pumps each with 60 HP electric motors, 3 compartments, 3 mud agitators, internal plumbing, slant bottom, top mounted walkways, covered porch and master skid.

Suction Tank 8’ 9” width x 6’ height x 39’ length 320 bbl, 2 each 5 x 6 centrifugal mud mixing and transfer pumps each with 60 HP electric motors, 3 compartments – one with 60 bbl pill capacity, 5 each mud agitators, internal plumbing, slant bottom, top mounted walkways, covered porch and master skid.

Mud Cleaning Equipment:
2 each National/Varco D235-LI Linear Motion Shale Shakers with oilfield base and loop isolators. Unit excepts 3 hook strip screen panels for 23.5 sq feet of screen area on single deck, 2 explosion proof 1800 RPM vibrator motors rated at 1.5 HP each and explosion proof motor starter.

Double Life 1310 De-Sander with 3 each 10 inch urethane cones, vitriolic couplings and header gauge. The unit is rated from 1500 to 1600 GPM at 65 to 75 head feet.

Double Life V-514 De-Silter with 14 each 5 inch urethane cones, elbows, vitriolic couplings and header gauge on a oilfield type skid. The unit is rated at 1600 GPM at 70 feet of head

Water Tank & Dog House:
Water Tank 500 bbl: 8.5’ width x 9’ height x 42’ length water tank with 8’ enclosed pumps/parts room.
Dog House: 8’ width x 30’ length top mounted insulated doghouse with knowledge box, lockers, Electric Heat and Pason monitoring equipment with touch screen.

Fuel Tanks:
Primary Tank: 8’ width x 6’ height x 10’ length, 3,500 gallon diesel fuel tank.

Generator Set:
Primary Light Plant: 450 KW Set Model 400 DSEC generator powered by a Series 60 Detroit Diesel, digital control panel with adjustable Hertz control. Electric start and low pressure kill, skid mounted. Storage & parts container mounted on same skid. Set up to handle 110 volt and 220 volt hook ups for directional trailers. All wiring and lighting on rig is explosion proof.

Secondary Light Plant: 210 KW Prime Power generator powered by 3406 CAT. Control panel with adjustable Hertz control. Skid mounted. (Not normally mobilized with rig)

Recording & Monitoring Equipment: Rig equipped with PASON Electronic Drilling Recorder (EDR) Includes: Doghouse touch screen computer, Rig Site Server, Rig Management PC workstation, IADC approved Pason electronic work station, contractor morning report, Access to Pason Data Hub with drilling date a minimum twice daily, and commercial grade satellite dish receiver/transmitter. All Pason Services are available upon request. (OPERATOR COSTS)

Handling Tools & Auxiliary Tools:
Folley AAX tongs with heads sizes from 3 ½” to 11”.
3 ½”- 4”-4 ½” Drill Pipe slips
Elevators: 3 ½” BN, 4” BN, 4 ½” BN, 5 ½” casing, 7” casing, 8 5/8”casing

5 ½” through 7” Drill Collar slips
Drill Collar Safety Clamp
2 – Hydraulic pipe handling winches
Martin Decker Weight Indicator
Tong torque gauge
Rotary torque gauge
3 ½” ID Rotary Hose
All rig piping and unions rated to 4000 psi
1 Center Tub with foldout 10 foot casing extension, 6 Pipe Tubs
Sure Shot deviation tool with wire line unit
Rat House & Mouse Hole

Rotating & Traveling Equipment:
Gardner Denver style 17 ½” Rotary Table (New December 2006)
Oil Well PC-150 Swivel
4 ¼” Hex Kelly 40 feet overall length, 37 working length
Foster Kelly Spinner,
Varco hex drive Kelly Drive Bushings (New December 2005)
Washington Series 1300 Rotating Head
YG135 150 ton, 8 line, 1 1/8” traveling blocks with hydra-hook (New April 2009)
1 1/8” Drill Line
2 3/8” X 96” Elevator Links
Rauch Pipe Spinner

Well Control Equipment:
Regan 10” 3000 lbs annular BOP (Rebuilt mid 2006)
Shaffer type E, 11” double ram BOP (Rebuilt by Shaffer 2007)
80 gallon Accumulator with electric driven triplex 3 station remote closing unit.

Drill Pipe & Drill Collars:
12 each 6 ½” 96 #/ft 4 ½” XH Thread, HB, Slip Recessed Drill Collars (6 1/2” OD, 2 ¼” ID)
6000 feet of 4 1/2” 16.6 #/ft S135 Drill Pipe with 4 ½” XH HB BN tool joints
3 each 8” Drill Collars 6 5/8” Regular

rig-16-site